BLOGS

The black phosphorus composite material connected by carbon-phosphorus covalent bonds has a more stable structure and a higher lithium-ion storage capacity. Credit: DONG Yihan, SHI Qianhui, and LIANG Yan

Topics: Alternative Energy, Applied Physics, Battery, Nanotechnology, Research

A new electrode material could make it possible to construct lithium-ion batteries with a high charging rate and storage capacity. If scaled up, the anode material developed by researchers at the University of Science and Technology of China (USTC) and colleagues in the US might be used to manufacture batteries with an energy density of more than 350 watt-hours per kilogram – enough for a typical electric vehicle (EV) to travel 600 miles on a single charge.

Lithium ions are the workhorse in many common battery applications, including electric vehicles. During operation, these ions move back and forth between the anode and cathode through an electrolyte as part of the battery’s charge-discharge cycle. A battery’s performance thus depends largely on the materials used in the electrodes and electrolyte, which need to be able to store and transfer many lithium ions in a short period – all while remaining electrochemically stable – so they can be recharged hundreds of times. Maximizing the performance of all these materials at the same time is a longstanding goal of battery research, yet in practice, improvements in one usually come at the expense of the others.

“A typical trade-off lies in the storage capacity and rate capability of the electrode material,” co-team leader Hengxing Ji tells Physics World. “For example, anode materials with high lithium storage capacity, such as silicon, are usually reported as having low lithium-ion conductivity, which hinders fast battery [charging]. As a result, the increase in battery capacity usually leads to a long charging time, which represents a critical roadblock for more widespread adoption of EVs.”

Black phosphorus composite makes a better battery, Isabelle Dumé, Physics World

Gentle breeze: illustration of the B-TENG triboelectric nanogenerator, which harvests electricity that is generated by fluttering polymer strips. (Courtesy: Xin Chen/Xiaojing Mu/Ya Yang)

Topics: Applied Physics, Nanotechnology, Polymers, Research

A new low-cost nanogenerator that can efficiently harvest electrical energy from ambient wind has been created by Ya Yang at the Beijing Institute of Nanoenergy and Nanosystems of the Chinese Academy of Sciences and colleagues. The team reports that the device achieves high electrical conversion efficiencies for breezes of 4–8 m/s (14–28 km/h) and says that it could be used to generate electricity in everyday situations, where conventional wind turbines are not practical.

As the drive to develop renewable sources of energy intensifies, there is growing interest in harvesting ambient energy in everyday environments. From breezes along city streets to the airflows created as we walk, the mechanical energy contained in ambient wind is abundant. The challenge is to harvest this every in an efficient and practical way. This has proven difficult using existing technologies such as piezoelectric films, which operate at very low power outputs.

Yang’s team based their new design around two well-known phenomena in physics. The first is the Bernoulli effect, which causes the fluttering of two adjacent flags to couple. If separated by a very small gap, the flags will flutter in-phase, while at slightly larger separations, they flap out-of-phase, and symmetrically about a central plane. The second is the triboelectric effect – the familiar phenomenon behind the “static electricity” that is created when different objects are rubbed together and then separated – resulting in opposite electrical charges on the objects and a voltage between the two.

Fluttering polymer ribbons harvest electrical energy, Physics World